Tel: +44 (0) 1904 406082

Calibration Barcodes

Seralite® – FLC Serum (SKL10025): Batch Specific Calibration Barcodes

The pre-calculated batch specific calibration parameters for the Seralite®– FLC Serum assay are stored on individual QR codes and are available to download from the table below. The calibration data is only valid for a period of six months, after which the barcode will expire and a new barcode will become available.

The table below details all the current batch specific calibration barcodes:

Batch Number Date of validity Expiry Date Download
SS180301 1st September 2019 December 31st 2019 Click here
SS180401 1st September 2019 December 31st 2019 Click here
SS180501 1st September 2019 February 29th 2020 Click here
SS190101 1st September 2019 December 31st 2019 Click here


Once downloaded, the calibration parameters for the assay are required to be uploaded to the ADxLR5® Reader System prior to any testing being performed. To upload the data the calibration barcode is required to be scanned and the information uploaded and stored in the calibration library within the Reader. Once uploaded the calibration data will be available for all future testing of the batch until the calibration barcode expires.

In the absence of a valid barcode no testing will be able to be performed.

Please refer to the current Seralite®– FLC Serum User Guide (version 20.00) and ADxLR5® Reader System User Guide (version 10.01) for full guidance.

If you have any questions or are experiencing difficulties please to do not hesitate to contact Abingdon Health at: or call +44 (0) 1904 40 60 80.